Service · 02

CNC engraving — Southwest Florida.

A signature cut directly into the slab. Permanent as the floor itself.

Shown: 24-ft Cougar Companies logo · See the project ↓

Featured Project · Cougar Companies

A 24-foot logo. Cut in.

The Cougar Companies logo runs 24 feet across their warehouse floor. We cut it directly into the slab with our RedArt CNC, which mounts over the floor on a rail frame and mills the artwork tile by tile, straight from the company’s brand file.

Then the whole floor went to full aggregate and a 1,500-grit polish. Forklifts and scissor lifts run across that logo every day, and it’s holding up strong. There’s nothing on top to wear off, because the logo is part of the floor.

5,500Sq ft · 2 floors

24 ftCNC-engraved logo

1,500Grit · full aggregate

10Days start to finish

The finished 24-ft logo

RedArt CNC, mid-cut

Mirror-finish polished floor at Cougar Companies — Polished to 1,500-grit around the logo

Daily forklift traffic. Still sharp.

“You can’t hurt this floor.”— Cougar Companies, driving a forklift across it

See the full project

In Motion

The RedArt CNC Pro in action on a floor.

How the machine reads a floor.

Our RedArt CNC Pro engraves directly into a finished slab — registered to reference marks, guided by the toolpath, and run unattended until the logo is cut.

It works in tiled passes, so a design that starts at 2 × 3 ft can also cover an entire entryway, lobby, or even a football field — produced in sequence from the same vector artwork.

RedArt CNC Pro · Mid-Cut Detail · Laishley Crab House

The Signature

Carved, not printed.

Logos belong on walls. And sometimes — when the space deserves it — on the floor. CNC engraving cuts a logo, text, picture, or number directly into a polished concrete slab with sub-millimeter precision.

Because the engraving lives inside the concrete, it wears as the floor wears. No peeling, no re-painting, no touch-ups. The logo becomes part of the slab itself.

The Detail

Laishley Crab House.

Waterfront restaurant, Punta Gorda. A logo engraved into the entryway of a polished-concrete dining floor. Cut depth: 1/8 inch. Infill: none · natural slab.

Every engraving is modeled from vector artwork, toolpath-generated, and cut in a single unattended session on our in-house RedArt CNC Pro platform. The system works on a tile-indexed principle — so a logo can be produced at almost any scale, from a 2 × 3 ft signature at an entryway up to field-sized installations.

Minimum Size 2 × 3 ft
Maximum Size No Practical Limit
Standard Cut $100–125 / sq ft
Color Infill $175 / sq ft
Scale Pricing Larger = Better Rate

Logos are priced per square foot. The larger the piece, the more efficient the per-sq-ft rate — large-format installations come in meaningfully lower than the headline price.

The Process